Scotch-Brite Clean and Strip Bonded Cleaning Brush, CS-CB, 7S
ExtraCoarse

Scotch-Brite Clean and Strip Bonded Cleaning Brush, CS-CB, 7S ExtraCoarse

Regular price
/

$17,500.99 USD & FREE Shipping.
  • Available in different densities, so operators can choose the right grade for their specific project
  • Made with sharp cutting silicon carbide mineral for a fast, sustained cut
  • Steel core helps minimize brush's tendency to yield or deflect on the workpiece
  • Open web resists loading, contributing to longer abrasive service life
  • Open web responds to surface irregularities without altering geometry of the part
Overview
Scotch-Brite Clean and Strip Bonded Cleaning Brush aggressively cleans and deburrs a variety of hard metals. Its a heavy-duty abrasive designed to clean substrates and rid them of rust, corrosion, light mill scale and other surface contaminants from metal sheet or coil.

Heavy-Duty CleaningAnchor
Among our Scotch-Briteâ„¢ Flap and Cleaning Brushes, the Scotch-Briteâ„¢ Clean and Strip Bonded Cleaning Brush is one of the most aggressive brushes.Anchor

Combining extra coarse (XCS) silicon carbide mineral with hard densities (5, 7) makes this Scotch-Brite™ brush especially tough and strong. When brought in contact with the workpiece, this brush will not yield or cut as softly other brushes – for example, the Clean & Finish Flap Brush or the High Strength Flap Brush. As operators know, many variables impact which abrasive should be used. For some applications, a lighter, softer abrasive is the best choice. For applications that require heavy-duty cleaning, our Scotch-Brite™ Clean and Strip Bonded Cleaning Brush is a good choice.Anchor

Anchor

Durable Construction of Scotch-Briteâ„¢ Cleaning BrushesAnchor
We engineer Scotch-Brite™ cleaning brushes by attaching circular sections of non-woven material to a cylindrical core. Typical applications for cleaning brushes include coil cleaning prior to coating, deburring, reclaiming sheet and coil and scale / oxide removal. The Scotch-Brite™ brush has an arbor hole to accommodate a shaft and may be secured in place with a flange and key. It will not fray or splinter when faced with edges. The steel core on the brush keeps it sturdy and adds a level of durability to the brush when it’s run on finishing equipment. Operators may choose to add a lubricant or coolant when cleaning, because it helps wash away swarf and reduce loading, which extends the brush’s service life.AnchorAnchor

The Many Benefits of Open Web Abrasives
Nonwoven technology makes our Scotch-Briteâ„¢ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.Anchor

Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Briteâ„¢ products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring, and more, Scotch-Briteâ„¢ abrasives work fast and deliver consistent results, part after part.

Note: When ordering a bonded construction cleaning brush, please allow an additional 1-1/4" to provide clearance for the 5/8" lock collars located at both ends of the brush. For instance, if you require 40" of usable brush width, order a 40" wide brush. This brush, however, when measured at the core will actually be 41-1/4" including the lock collars.

Scotch-Brite Clean and Strip Bonded Cleaning Brush, CS-CB, 7S ExtraCoarse

Specifications
General Information
Brand
Scotch-Briteâ„¢
Country Of Origin
United States
Sold As
Cylinder
California Residents
Return Policy
NCNR - Non-Cancellable / Non-Returnable
Dimensions and Specifications
Center Hole Diameter (Imperial)
5.75 in
Center Hole Diameter (Metric)
146.05 mm
Maximum Speed
1200 rpm
Overall Diameter (Imperial)
12 in
Overall Diameter (Metric)
304.8 mm
Overall Width (Imperial)
80 in
Overall Width (Metric)
2032 mm
Grit
Non Pertinent
Width
12.6 in
32 cm
Height
72.5 in
184.15 cm
Length
12.6 in
32 cm
Volume
188.57 dm3
Weight
237 lb
107.5 kg
Other Details
Density
7
Material and Composition
Abrasive Material
Silicon Carbide
Grade
Extra Coarse
Product Form
Cleaning Brush
Why would you use this tool for ?
Reviews