Dynatron Dyna-Hair Long Strand, Filler 472, 1 qt

Dynatron Dyna-Hair Long Strand, Filler 472, 1 qt

Regular price
/

$46.99 USD & FREE Shipping.
  • Fills splits, cracks or holes in fiberglass or metal
  • Improved strength and flexibility to prevent cracking
  • Waterproof, for protected use in unpainted areas
  • Creates a smooth, professional-quality repair
  • Compatible with most automotive paints
Overview
Dynatron Dyna-Hair Long Strand body filler repairs splits, cracks and holes in all kinds of surfaces, including wood, fiberglass, aluminum and bare or galvanized steel. Reinforced with long fiberglass strands, this waterproof filler offers additional versatility to any automotive repair.

Balance of Performance
Dynatron™ Dyna Hair® reinforced body filler provides a balance of performance and economy when repairing splits, cracks or rust holes in automotive bodies. Reinforced with long strand fiberglass, this filler creates waterproof repairs that are twice the strength of ordinary body fillers. Our two component polyester compound applies easily and creates a smooth, professional quality repair. This filler is produced with the highest quality resins, talc and microspheres. Dynalite has become an industry standard because it combines ease of use, faster working properties and top notch results.

Automotive body technicians rely on our filler for its good adhesion, consistent quality and compatibility with most paints. It combines spreading, easy mixing, good featheredging, and non separating properties into one filler.

Using Dynatron™ Dynalite™ Light Weight Body Filler is as easy as this simple 6 step process:
1. Clean the repair area using soap and water followed by a wax & grease remover/surface cleaner. Sand the surface as needed with grade P40 to P80 3M™ abrasive.
Note: If grinding is required use a grade 50 3M™ grinding disc, blow off the sanding dust with clean dry air. If repairing galvanized steel, e coat, primed/ painted surfaces or aluminum, sand with grade P80 3M™ abrasive to remove the paint/primer. Blow off with clean dry compressed air and re clean the surface using a clean paper or cloth towel and a wax & grease remover/surface cleaner.
2. Apply the required amount of body filler to a clean mixing surface. (Do not use discarded cardboard as a mixing surface as contamination may occur.) The correct hardener to filler ratio = 3 inch diameter circle 1/2 inch thick of filler to a 3 inch strip of cream hardener.
3. Mix the body filler and cream hardener thoroughly, to a uniform color. Gel time/setting time is approximately 3-5 minutes @ 75°F (24°C) using 2% hardener as prescribed. Spread the filler on the mixing board, being sure to break any air bubbles that were introduced during mixing.
4. Apply a thin layer using firm pressure to ensure maximum adhesion being sure to “wet out” the surface completely. Apply additional filler in layers, building up the damaged area higher than the surrounding surface. Maximum filler thickness should not exceed 1/4 inch. Allow curing time of 20 minutes.
5. Sand the filler to the proper contour with 3M™ abrasives, using the following recommended grade sequence: P40, P80, P180. Note: If more filler is needed blow off with clean dry compressed air and follow steps 2 through 6.
6. Wait approximately 45 minutes before applying primer and paint, always follow your paint company’s recommended procedures.

Dynatron Dyna-Hair Long Strand, Filler 472, 1 qt

Specifications
General Information
Brand
3M™
Container Type
Can
Product Type
Glass Reinforced Filler
Country Of Origin
United States
Sold As
Canister
Lead Time
2 days
California Residents
Dimensions and Specifications
Container Size (Imperial)
1 Quart
Container Size (Metric)
946.353 ml
Volume (Imperial)
32 fl oz
Volume (Metric)
0.95 L
Container Size Imperial
1.0
Container Size Metric
946.353
Volume Imperial
32.0
Volume Metric
0.95
Volume
107.24 cubic inch
1757.39 cm3
Weight
2.85 lb
1.29 kg
Other Details
Consistency
Paste
Dry Time
20 min
Paint Time
45 Minute
Performance Level
Good
Sand Time
20 Minute
Work Time
4 Minutes
Consumer Label
Yes
Usage Information
Application
Dent Fill
Color and Appearance
Product Color
Green
Packaging and Shipping
Case Quantity
12.0 Cans per Case
Handling Time
3 - 5 min
Number Per Inner
1.0 per Can
Why would you use this tool for ?
Reviews